| |
Humidity Chamber |
Construction
Chamber interior is fabricated of stainless steel with dull finish & exterior is of stainless steel / G.I. Powder coated.
The inner working chamber is water & vapour tight high-grade stainless steel.
All seams are arc-welded & passivated for strength & durability.
Technical Specification:
Temperature Range: 20°C - 60 °C
Humidity Range: 40%RH - 95%RH
Accuracy: ±0.2 °C / ±2.0 % RH
Uniformity: ±1.0 °C / ±3.0 % RH
Test suitable for: 25°C & 60%RH,
30°C & 75%RH, 40°C & 75%RH,
30°C & 75%RH
|
 |
| |
 |
|
| |
| Specially designed Chambers for Low Humidity conditions such as 25°C & 40%RH, 40°C & 25%RH, 30°C & 35%RH. |
| |
Models |
Material of Construction
|
Interior |
Exterior |
MK1 |
S.S.304 Dull Finish |
G.I Powder Coated |
MK2 |
S.S.304 Dull Finish |
S.S.304 Dull Finish |
MK3 |
S.S.316 Dull Finish |
S.S.304 Dull Finish |
|
| |
| Features: |
Humidity System
Humidity is generated by water evaporation in separate compartment providing a water droplet free atmosphere. This ensures excellent uniformity & stability of the chamber environment. A reservoir water tank is provided which is fitted with float valve to maintain the water level in the steam generator tank. |
| |
| Safety System |
| • |
PLC based safety controller is provided having five-safety cut-off with Auto Reset facility. |
| • |
Lower 2 Temp cut-off (Below set Point): Cut off Load supply with audio visual indication
|
| • |
Lower 1 Temp cut-off (Below set Point): Cut off Refrigeration system with audio visual indication |
| • |
Higher 1Temp cut-off (Above set point): Cut off Heating system with audio visual indication |
| • |
Higher 2 Temp cut-off (Above set point): Cut off Load supply with audio visual indication
Boiler safety: Low water level cut-off, when water is not present in the steam generator tank. |
|
| |
Insulation
Eco friendly Poly Urethane insulation provided for maximum thermal protection & to increase rigidity for reliable daily use. |
| |
Leveling Legs
Bullet feet ensure easy mobility during installation & cleaning. Bullet feet’s are specially designed for long life under heavy load with built in screwing adjustment |
| |
Full View Glass Door
A multi pane viewing door prevents condensation & allows product view. Inner & outer doors are sealed around the entire perimeter by silicone sponge rubber gasket. |
| |
Air Circulation
A high efficiency air circulation system is an integral part of chamber construction. This direct drive design has an extended shaft electric motor coupled to aluminum centrifugal blower wheel. This horizontal airflow across the chamber working space provides an even & accurate temperature & humidity gradient. |
| |
Chamber Port
60mm diameter port with silicon cork is included for passing sensor probes into the chamber workspace for validation without altering the chamber. |
| |
Interior Lighting
High intensity, low voltage fluorescent lights are provided. Interior light makes viewing workspace & product hassle free. |
| |
Trays
Heavy duty solid stainless steel duly electro polished wiremesh type trays are provided which are easy to clean, saving time & effort & adjustable for convenience. |
| |
Control System
• PLC based control system.
• 0.1°C Resolution for temperature & 0.1% Resolution for RH
• High stability & reliability; Security lock for prevention of unauthorized tampering; Non Volatile memory. |
| |
Refrigeration System
• A single stage refrigeration system with a hermitically sealed reciprocating compressor.
• Fin & tube type bullet expanded evaporator are used. High efficiency fin & tube type bullet expanded condenser coils are used.
• Refrigeration design protects compressors & prolongs life keeping cool during all operating condition. Refrigeration design uses less power saving operating cost. |
| |
Heating System
• High efficiency, low watt density S.S. tubular air heaters are used with ceramic core.
• The combination of air flow, instrument response & fast reacting heaters provides very accurate & straight line control of temperature.
• These heaters have a long life & are very reliable with no down time |
| |
Scanner
For validation purpose Temp / Humidity multipoint scanner can be provided with printer & PC interface facility. |
| |
21 CFR PART-11 Compliance
Audit Trail, E-Records& E-signatures, and Graphical analysis & Data acquisition. |
| |
SMS Mobile Alert System
With GSM technology we will get malfunction SMS of equipment on Mobile Phones. |
| |
NOTE: MK * - MK1 / MK2 / MK3
MK** -S100H: Split type Condensing Unit
MK** -S200H & MK** -S300H are Panel & Trolley type (Split Type Condensing Unit) |
| |
| Optional Features» |
| |
